Marble polishing and restoration
Etch marks, traffic lanes and lost shine are not the end of a marble floor. We grind, hone and polish the stone itself, with no coatings or waxes, until it reflects light the way it did the day it was laid.
Marble is calcium carbonate, which makes it beautiful and vulnerable in equal measure. Anything acidic, like citrus, wine or cleaning sprays, dissolves a little of the surface on contact and leaves the dull etch marks a rag can’t remove. Foot traffic adds fine scratches that scatter light, and over the years a floor that once read as one continuous sheet of stone turns cloudy and gray. In Miami condos and lobbies, the fine sand tracked in year-round only speeds that wear.
Restoration reverses that mechanically. Working wet with diamond abrasives, we cut below the damage, then step through finer and finer grits until the surface is optically flat. The deeper the shine you want, the finer we go: a soft honed matte, a satin glow or a full mirror polish. We finish with a penetrating sealer that slows the next etch without changing how the stone looks or feels.
Etch and stain removal
Acid etching and embedded stains come out first. We cut the surface back to sound stone, which is the only real fix for etch marks, and treat organic staining with poultices where the marble allows.
Diamond honing
Wet honing with progressively finer diamonds flattens scratches and lippage and brings the floor back to one true plane. This is where the clarity of the final finish is decided.
Polishing and sealing
The final polish is tuned to the finish you want, from honed matte to mirror gloss, then locked in with a penetrating sealer that keeps daily spills at the surface where they can be wiped away.
Common questions
What is the difference between an etch mark and a stain?
An etch is damage to the surface itself. Acids in juice, wine or the wrong cleaner eat into the polish and leave a dull mark. A stain is color absorbed into the pore. Etches are removed by honing and repolishing the stone; stains are drawn out with poultices before any polishing begins.
How long does marble floor polishing take?
It depends on condition and area, but most residential floors take one to three days. We grind, hone, and polish in stages, and the floor is ready to walk on the same day we finish.
Will the work fill my home with dust?
No. Marble is honed and polished wet with diamond abrasives, so the process is essentially dust-free. We protect baseboards, cabinetry, and adjacent rooms before the first pass.
Can deep scratches and dull traffic lanes be removed?
Yes. Traffic wear and most scratches live in the top layer of the stone. Grinding and honing take the surface down past them, and polishing brings back one even reflection across the whole floor.
How do I keep marble looking polished in Miami?
Use a neutral-pH stone cleaner, wipe up citrus and coffee quickly, put walk-off mats at entries, and keep the stone sealed. Humidity does not dull marble. Tracked-in sand and acidic spills do.
Where we work
- Coral Gables
- Brickell
- Miami Beach
- Doral
- Aventura
- Miami Gardens
- North Miami
- North Miami Beach
- Miami Lakes
- Miami Shores
- Opa-locka
- Biscayne Park
- El Portal
- Sunny Isles Beach
- Key Biscayne
- Bal Harbour
- Surfside
- Bay Harbor Islands
- Golden Beach
- North Bay Village
- Indian Creek
- Hialeah
- Miami
- Coconut Grove
- Wynwood
- Westchester
- West Miami
- Sweetwater
- Tamiami
- Miami Springs
- Virginia Gardens
- Hialeah Gardens
- Medley
- Kendall
- Pinecrest
- Palmetto Bay
- South Miami
- Cutler Bay
- The Hammocks
- Homestead
- Florida City
Ready to see your stone again?
Tell us about the stone, the area and the finish you want. We’ll come see it, explain what it needs and leave you a clear, itemized estimate at no charge.
Request a free estimate